Consumer Products
DigiFence®
DigiFence is the ORIGINAL Digital Retrofit Kit for Table Saw Fences. This is the same product that has been supplied to commercial woodworking and the home
hobby market since 1989. Each system contains an Accurate Technology Digi measuring system, all the hardware you will need to install the Digi-Fence on
your saw fence, installation instructions and an operation manual. A typical installation takes about 35-45 minutes. The standard kit includes measuring capability
up to 60 inches (1500mm), and the optional extended scale will provide measuring capability up to 96 inches (2400mm).
Digi-Fence is available for many of the most popular Table Saw fence systems such as SawStop, Biesemeyer, Jet, Powermatic, Delta and more.
Easy to read display characters are ¾ inch tall, and all Digi-Fence systems can display millimeters, decimal
inches or fractions – 1/16, 1/32 or 1/64 at the push of a button.
The readout has two measurement modes, or indexes. One is called ABS or Absolute, and the other INC, or
Incremental. The ABS mode reads the current position of the fence referenced from a fixed position such as
the saw blade. The INC mode is used to make relative measurements from one arbitrary point to another, and
the absolute position of the fence is never lost when using the incremental measuring mode.
Patented Inductive measurement technology is immune to sawdust and other shop debris.
If getting the most accurate cuts possible on your table saw sounds like a good way to step up the overall
quality of you projects, the Digi-Fence System is something to be considered. Between the extreme accuracy
and the ease of operation, The Digi-Fence System will step up the performance of your saw in a big way.
……………………………………………………………………………………………………www.newwoodworker.com
If you are a woodworker who likes to run equipment “by the numbers” an accurate scale is very important; the
Digi-Fence gives you that scale on an “analog” rip fence……………………………….....www. benchmark.20m.com
At one inch, I used both a Starrett and a Stanley tape measure as well as a Starrett steel ruler to verify the
accuracy to the top tooth of the saw blade. The Digi-Fence was dead on………..…Graham McCulloch Tool Test©
16
Range Accuracy Resolution Fractions Digit Size Offsets Auto ON / OFF Battery Life Warranty Customer Support Mfg/Since
DIGI FENCE® 60 IN .010 IN .01 & .001in or .1 & .01 mm BEST 3/4 IN YES YES 1 Year + 1 Year 800 #, e-mail, Fax USA / 1989
Brand X 60 IN .025 IN .005in or .01mm OK 1/4 IN NO NO 6 MO. ?? email CHINA / 2006
Brand Y 50 IN .001 IN ? .0005in or .01mm NONE 3/8 IN YES ?? 6 MO. ?? TOLL call CHINA / 2004
Digital Table Saw Kit Comparison
(17 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales