ProTable-CAB™
ProTable-CAB is turn-key solution for dimensional quality control
measurements of cabinet doors.
ProTable-CAB uses two ProScale® measuring systems placed in an X-Y
configuration. Non-skilled operators can make simultaneous dimensional (height
and width) measurements up to 40 by 60 or 48 by 96 inches.
The measuring surface angle is adjustable from 15 to 55 degrees
of tilt for maximum comfort and ease of operation (Standard 40 x 60 model only).
ProTable-CAB comes fully assembled. Simply remove the packing, adjust the
table angle and begin measuring parts.
ProTable-CAB is available in two standard sizes:
Standard: 40 x 60 inch (1000 x 1500mm) Measuring Range
XL: 48 x 96 inch (1200 x 2400mm) Measuring Range
Custom sizes, designs and configurations are available for unique
measurement requirements.
And three Display/Software configurations:
ProTable CAB
This model uses an LCD Digital Readout on each of the measuring axes. These readouts are easy to configure
and have several built in functions applicable to quality measuring applications. Each Readout is powered by a
CR123 lithium battery, making this entire measuring system completely portable: no external power is required!
ProTable-CAB V
The V model replaces the LCD Digital Readouts with a touch screen LCD monitor and VDRO™ software. The
software includes a simple-to-use interface that displays the actual measured value of each axis with a color
coded indication of an In- or Out-of-tolerance condition. Measurement results are compared to nominal part
geometry data stored in your database. Individual part measurements can then be recorded in a .CSV file.
ProTable-CAB S
The S model is a fully configured system that includes an industrial computer, wireless data transmitters, an
LCD touch screen monitor and ProCAB QC™ Quality Control software. All software is pre-installed and
configured for your system. ProCAB QC can import order or production data, and document the dimensional
quality of measured parts. ProCAB-QC software will automatically identify a randomly measured part, associate
the measurement data with a corresponding line item on an order and record the measurement results.
ProSet™ is a specially designed ProScale digital measuring system for use
on dimensioning heads of moulders. Simply set the ProSet readout to "Radius" mode
and adjust the spindle position until the measured radius of the cutterhead is
displayed. Push a button on the ProSet for "Width" mode and it displays the outfeed
dimension based on the current position of the spindle.
Planer/Sander Kit
Here's everything you need to add digital measuring capability to your commercial
Planer, Sander, Moulder, or Shaper. This Kit includes a ProScale Model
150-10 to measure up to 10 inches of travel or tooling position.
A universal mounting kit is supplied that contains several commonly used brackets
for applications of this kind, making installation a snap.
12
(17 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales