Accurate Technology ProScale Manual de usuario descargar pdf (Pagina 43)

ProScale M150, M250 with LCD Digital Displays Page 43 of 48

Programming Summary

Factory

Parameter Function Default THIS SYSTEM



Pr0 Reading Direction 0 ______

Pr1 Segment Offset 1 - On ______

Pr2 High Speed ReadHead 0 - Off ______

Pr3 Zero, Offset Entry 1 - Enable ______

Pr4 Display Resolution 1 - Normal ______

Pr5 mm or cm 0 - mm ______

Pr6 Fractions, mm, in 0 - all ______

Pr7 Scaling 1.0000 (none) ______

Pr8 Auto off 15 - 15 min. ______

Pr9 Auxiliary Keypad 7 - all keys ______

Pr10 Offset Addition 0 - disabled ______

Pr11 Offset Addition 1 1.000 Inch ______

Pr12 Offset Addition 2 1.500 Inch ______

Pr13 Offset Addition 3 2.000 Inch ______

Pr14 Output Mode 0 - off ______

Pr15 Output Polarity 0 – Normally Open ______

Pr16 Lower Limit 0.000 ______

Pr17 Upper Limit 5.000 Inch ______

Pr18 Drift Tolerance .010 Inch ______

Pr19 Auto Monitor ON 0 - disabled ______

Pr20 Auto Monitor OFF 0 - disabled ______

Pr21 Auto Monitor Distance .500 Inch ______

Pr22 Backlight On 4 - Always ______

Pr23 FUTURE FEATURE 1 ______

Pr24 RF Display Address 0 – Off ______

Pr25 RF System ID 0 ______

Pr26 Noise Suppression 0 – Minimum ______

Pr27 * Accuracy Comp. Enable 1 – ON ______

Pr28 * Compensation Multiple 5 – 5 in. ______

* Pr27 and Pr28 are only operational with a special version of Firmware.

ProScale Display units that support the Compensation feature have a “C” at

the end of the firmware revision ID. (The Firmware Version is momentarily

displayed on power-up).

Pressing and holding the ON/OFF key and MODE key for 10 seconds

with power off will perform a full segment LCD test AND set all

Programming Parameters to factory defaults.

Note: Defaulting the display to factory defaults will NOT erase the

compensation table.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Accurate Technology ProScale Manual de usuario Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Accurate Technology ProScale